További részletek

Item Type:

Frequency Converter

Material:

ABS, Aluminum Alloy

Input Voltage:

380-440V

Output Power:

0.75KW

Output Current:

2.5A

Output Frequency:

0-999HZ

Applications:

Motors, Mixers, Ball Mills, Pumps, Cranes, Conveyors, Fans, CNC Machine Tools, Etc.

How to Use:

1. Before wiring, please make sure that the input power is in the power off state.:

2. Wiring operation, please professional electrical engineering personnel to carry out.:

3. Please make sure to ground the ground terminal.:

4. After the wiring of emergency stop circuit is completed, please make sure to check whether the action is effective.:

5. Do not connect the output line of the inverter to the shell, and do not short circuit the output line.:

6. Please make sure that the voltage of the AC main circuit power supply is the same as the rated voltage of the inverter.:

7. Do not conduct voltage withstand test on the inverter.:

8. Please connect the braking resistor according to the wiring diagram.:

9. Do not connect the power line to the output U, V, W terminals.:

10. Do not connect the contactor to the output circuit.:

11. Be sure to install the protection cover before powering on. When removing the cover, be sure to disconnect the power supply.:

12. Do not use the inverter with the reset and retry function near mechanical equipment. Because it will start again suddenly when the alarm stops.:

13. Confirm that the alarm is reset only after the operation signal is cut off. If the alarm is reset under the running signal, the inverter may start suddenly.:

14. Do not touch the terminals of the inverter, there is high voltage on the terminals, which is very dangerous.:

15. Do not change the wiring and terminal disassembly during power on.:

16. Cut off the main circuit power before inspection and maintenance.:

17. Do not modify the inverter without permission.:

How to Use:

Please refer to the operating :